RSS Feed
Twitter
11:22 AM
Unknown
It isn't always easy to tell if the water in your house is safe to drink, but if you have a purification system, such as an under sink water filter, you may feel more assured. While you can rely at least a little on your senses to alert you to things that might be making their way into your water system, such as sulfur or too much chlorine, in some cases, contaminants such as bacteria, viruses, lead, and other chemicals can't be smelled or tasted. It might seem obvious, but if your water smells like rotten eggs, tastes like salt, or spots routinely appear on your glasses, testing your water will help to assure safety. Certain additives, such as shilajit powder, may also help with water quality.
Municipal systems within the United States mostly have safe drinking water because they must comply with the federal Safe Drinking Water Act. If water is supplied from a private well or you live in remote rural area, you would not be privy to these regulations. Unless you have reason to believe otherwise, municipal water in your home meets federal safety standards; however, unless you are using an under sink water filter or other filtration method, the only way to assure your water is safe to drink is to have your individual water supply tested. How should I test my tap water? Can I test my well water? Would it just be better to use filters or drinking only bottled water?
Testing your tap water on a municipal system within the United States, might be as easy as calling your local water supplier. They, by law, must provide you with the results of the testing routinely performed for your area. Of course, this will not be specific of your individual home, rather a selective sample of the system as a whole. Some municipalities will come and test the water directly from your tap, free of charge; otherwise, you may have to have a test done by a state-certified lab or independent firm. You can also perform a water test yourself with a home test kit. Most of these tests do not report for everything, but they can detect the more serious contaminants such as lead, arsenic, pesticides, and bacteria. Whichever method of testing you choose, be sure to use the first-draw water, water that comes out of the faucet first thing in the morning, as this will be your most accurate measure of contamination that might be present.
Since federal drinking water standards do not apply to private wells, it's up to you to have your water tested if you are in a location that utilizes one. Your local health department can advise you of possible wide spread well-water contamination in your area but testing your own water regularly and considering using an under sink water filter might be a good idea in these instances. Well water should be tested at least once a year for nitrates, coliform bacteria, total dissolved solids, and pH. Checks for lead, copper, arsenic, radon, pesticides, or other substances might also need to be conducted based on your location.
With all the contaminants that can get into municipal and well water, some people wonder if they are just better off using an under sink water filter, combined with shilajit powder, or wholly drinking bottled water. The answer is not necessarily. Bottled water, while more expensive then tap water, may not be any safer. In fact, in about one-fourth of instances, bottled water is simply tap water that has been processed and repackaged. The quality of bottled water varies from manufacturer to manufacturer and also depends on where the water originated. Filtered water can be an excellent solution as they remove lead and other contaminants from the water, but they do not necessarily remove all contaminants.
Obtaining safe drinking water then, in most instances, can be achieved with an under sink water filter, combined with shilajit powder.
Municipal systems within the United States mostly have safe drinking water because they must comply with the federal Safe Drinking Water Act. If water is supplied from a private well or you live in remote rural area, you would not be privy to these regulations. Unless you have reason to believe otherwise, municipal water in your home meets federal safety standards; however, unless you are using an under sink water filter or other filtration method, the only way to assure your water is safe to drink is to have your individual water supply tested. How should I test my tap water? Can I test my well water? Would it just be better to use filters or drinking only bottled water?
Testing your tap water on a municipal system within the United States, might be as easy as calling your local water supplier. They, by law, must provide you with the results of the testing routinely performed for your area. Of course, this will not be specific of your individual home, rather a selective sample of the system as a whole. Some municipalities will come and test the water directly from your tap, free of charge; otherwise, you may have to have a test done by a state-certified lab or independent firm. You can also perform a water test yourself with a home test kit. Most of these tests do not report for everything, but they can detect the more serious contaminants such as lead, arsenic, pesticides, and bacteria. Whichever method of testing you choose, be sure to use the first-draw water, water that comes out of the faucet first thing in the morning, as this will be your most accurate measure of contamination that might be present.
Since federal drinking water standards do not apply to private wells, it's up to you to have your water tested if you are in a location that utilizes one. Your local health department can advise you of possible wide spread well-water contamination in your area but testing your own water regularly and considering using an under sink water filter might be a good idea in these instances. Well water should be tested at least once a year for nitrates, coliform bacteria, total dissolved solids, and pH. Checks for lead, copper, arsenic, radon, pesticides, or other substances might also need to be conducted based on your location.
With all the contaminants that can get into municipal and well water, some people wonder if they are just better off using an under sink water filter, combined with shilajit powder, or wholly drinking bottled water. The answer is not necessarily. Bottled water, while more expensive then tap water, may not be any safer. In fact, in about one-fourth of instances, bottled water is simply tap water that has been processed and repackaged. The quality of bottled water varies from manufacturer to manufacturer and also depends on where the water originated. Filtered water can be an excellent solution as they remove lead and other contaminants from the water, but they do not necessarily remove all contaminants.
Obtaining safe drinking water then, in most instances, can be achieved with an under sink water filter, combined with shilajit powder.
About the Author:
Want to learn more about an under sink water filter, then visit Roxy Albright's website to learn more about this and shilajit powder.
0 comments:
Post a Comment